This staple jacket from 686 has been updated with waterproof technology. The Bedwin Snow Insulated jacket features InfiDRY® 3-Layer Stretch fabric with a DWR coating, which provides breathable, waterproof protection with a full range of motion. The densely insulated vest keeps your core warm, and grommeted underarm vents allow you to quickly release heat when you need to. Adjustable cuffs and hood give you a custom fit, and center zipper has a storm flap to keep out the elements. From the park, to the lodge, to the late night session, the Bedwin Insulated jacket will keep you toasty.
- InfiDRY® 3-Layer Bonded Stretch Fabric
- Polyester Fill
- Fully Taped
- Fixed Hood
- Polyester Fill
- 100% Polyester Fleece
- Dual Handwarmer Pockets
- Chest Pocket with Audio Outlet
- Internal Mesh Goggle / Storage Pocket
- 2-Way Adjustable Hood
- Adjustable Cuffs
- Storm Flap
- Grommeted Underarm Venting
Polyester Fill - Polyester insulation may not be as warm or light as down, but it's far easier to clean and performs better in wet conditions. If cost is a concern or you live in a wet climate, polyester insulation might be your best option.
Fully Taped - Having outerwear with fully taped seams means that on the inside of the jacket all the seams are covered in tape to provide the most effective waterproofing. It can be considered a key feature if you live in a wet climate or are planning on wearing the jacket during heavy rains. The downside is that due to the full taping there is less breathability than you'd experience with critically taped seams.
Polyester Fill - Polyester insulation may not be as warm or light as down, but it's far easier to clean and performs better in wet conditions. If cost is a concern or you live in a wet climate then polyester insulation might be your best option.
Synthetic insulation is measured in grams, so a jacket with a 80g rating simply means that a 1 meter by 1 meter piece of that particular jacket's insulation weighs 80 grams. The higher the rating, the warmer the outerwear.