From the top of the mountain to the snowy streets, the Rumor Insulated jacket has the winter style you've been looking for. 686's InfiDRY® fabric in combination with fully taped Bemis® seams and a DWR finish, ensures that water wont seep in. The powder skirt adjusts for a snug fit, and the Pant Jacket Connect™ System holds your powder skirt in place, keeping the snow out. The cuffs and helmet-compatible hood adjust to prevent the wind and snow from creeping in, and an assortment of pockets will keep your phone and other gadgets dry and secure. Time to gear up with a jacket that will keep you warm, dry, and stylish no matter what season it is.
- Fully Taped
- Fixed Hood
- Polyester Fill
- Body: 80
- Hood: 40
- Sherpa Fleece Back Panel and Inner Collar Lining
- Dual Handwarmer Pockets
- Full Velcro Closure Sleeve Pass Pocket
- Internal Mesh Goggle / Storage Pocket
- Dual Access Media Audio Pocket with Cord Outlet
- Under Arm
- Mesh Gussets
- Bemis® Seam Tape
- InfiDRY® Fabric Construction
- Death Grip Adjustable Cuffs
- Helmet Compatible One-Cinch Hood Adjustment
- Insulated Lycra® Wrist Gaiters
- Jacket to Pant Interface
- Adjustable Hood
- Tangle Free Headphone Loops
Fully Taped - Having outerwear with fully taped seams means that on the inside of the jacket all the seams are covered in tape to provide the most effective waterproofing. It can be considered a key feature if you live in a wet climate or are planning on wearing the jacket during heavy rains. The downside is that due to the full taping there is less breathability than you'd experience with critically taped seams.
Polyester Fill - Polyester insulation may not be as warm or light as down, but it's far easier to clean and performs better in wet conditions. If cost is a concern or you live in a wet climate then polyester insulation might be your best option.
Synthetic insulation is measured in grams, so a jacket with a 80g rating simply means that a 1 meter by 1 meter piece of that particular jacket's insulation weighs 80 grams. The higher the rating, the warmer the outerwear.
Bemis® Seam Tape - All 686 taped seams feature Bemis® branded taping to further ensure quality workmanship.
InfiDRY® Fabric Construction - Using specialty fabrics and modern lamination techniques InfiDRY® fabrics are layered in a way that provides a one-way portal for moisture that is virtually impenetrable from the outside, yet allows your body’s sweat to evaporate and pass through the fabric from the inside out.
Death Grip Adjustable Cuffs - 2-way adjustable cuff tabs worn around the thumb or wrist.
Insulated Lycra® Wrist Gaiters - Soft, stretchy insulated Lycra® fends off the cold without adding bulk or restricting movement.
Jacket to Pant Interface - Connect your jacket to your pants for better protection from the elements.