With great color combinations and patterns, this jacket will easily transition from the slopes to the streets. Plenty of Thermolite® insulation will keep you toasty and there are mesh-lined underarm vents if it gets a little too toasty. Rated at 10K in both waterproofing and breathability, the Prowess jacket will keep you warm, dry and fashionable for years to come.
- DRYRIDE Durashell™
- Fully Taped
- Fixed Hood
- Body: 80
- Sleeves: 60
- Zipper Front Handwarmer Pockets
- Zipper Sleeve Pass Pocket
- Dual Handwarmer Chest Pockets
- Therma-Pocket with Media Port
- Mesh Dump Pocket
- Under Arm
- Mesh Gussets
- bluesign® Approved
- YKK® Water Resistant Zippers
- Fulltime Contour™ Hood
- Living Lining™
- Magic Stitch Removable Waist Gaiter
- Pocket Access Hem Cinch
- Lifetime Warranty
- 3-Way Adjustable Hood
- Adjustable Cuffs
- Jacket to Pant Interface
- Key Clip
- Sherpa Fleece Lined Collar
- Soft Internal Lining at Top Closure
- Glove Loops
- Key Clip
- Pass Pocket
- Locker Loop
Utilizing advanced materials (all stamped with the DRYRIDE seal of approval), rigorous testing, and team input, DRYRIDE continues to evolve their technology to keep up with snowboarding’s progression.
DRYRIDE Durashell™ - A waterproof/breathable coating is applied to the backside of the DWR-finished outer-face fabric. Then a textured print is applied to shield the coating and create a silky smooth next-to-skin surface.
Fully Taped - Having outerwear with fully taped seams means that on the inside of the jacket all the seams are covered in tape to provide the most effective waterproofing. It can be considered a key feature if you live in a wet climate or are planning on wearing the jacket during heavy rains. The downside is that due to the full taping there is less breathability than you'd experience with critically taped seams.
Thermolite® - Thermolite® insulation is comprised of hollow-core fibers that trap in air for light, yet heavy-duty performance.
Synthetic insulation is measured in grams, so a jacket with a 80g rating simply means that a 1 meter by 1 meter piece of that particular jacket's insulation weighs 80 grams. The higher the rating, the warmer the outerwear.
bluesign® Approved - bluesign® offers the highest level of consumer safety employing methods and materials in their manufacture that conserve resources and minimize impacts on people and environment.
YKK® Water Resistant Zippers - YKK® matte water-resistant zippers for smoother performance and better drape, a cleaner finish, and overall higher strength.
Fulltime Contour™ Hood - Designed and built for standing sideways, throw this ergonomic hood up and still be able to see where you're riding. The dimensions and shape allow for the hood to be worn over your helmet, giving you total protection from the elements without sacrificing comfort or visibility.
Living Lining™ - Thermo-Regulating Technology works within a three-layer system, reacting to your body heat for regulated comfort.
Magic Stitch Removable Waist Gaiter - The powder skirt can be permanently removed by simply undoing one stitch.
Lifetime Warranty - Burton Snowboards warrants all Clothing, Outerwear, Bags, and Luggage sold by Burton to be free of defects in materials or workmanship for the practical lifetime of the product. Damage due to misuse, abuse, accidents, neglect, and wear and tear that can be reasonably expected as a result of extended use over time, are not covered by this Limited Lifetime Warranty but may be repaired at a reasonable cost.
Jacket to Pant Interface - Connect your jacket to your pants for better protection from the elements.