Free Shipping - Orders Over $60
Free Shipping - Orders Over $60

Caliber II Fifty Longboard Trucks

8 Reviews
midnight satin red
Color: midnight satin red
In Stock - FREE Shipping on orders over $60

The Caliber II Fifty longboard trucks have been re-designed with a stronger baseplate and hanger. The kingpin is made of grade 8 steel to ensure your trucks stay in one piece, no matter how hard you push.

  • Set of 2 Trucks
Ride Style
  • Freeride
  • Carving/Cruising
Non-Compatible Bushings
  • Bear Stepped Cone Bushings
  • Bear Stepped Barrel Bushings
Hanger Style
  • Symmetrical Hanger
Baseplate Angle
  • 50°
Bushing Shape
  • Barrel/Cone
  • Reverse Kingpin
  • Updated Bushing Seat Provides a No-Slip-Fit
  • Pivot Re-Designed for Tighter Tolerances with an Updated Chamfer
  • Circular Kingpin Hole with Updated Diameter
  • Truck Strength Increased by 40%
  • Pressed-in Grade 8 Hex Head Kingpin
  • Beefed Up and Reinforced Baseplate
  • Thinner Paints Used for Tighter Tolerances
Ride Style

Freeride - You need responsive trucks with charged rebound and a large turning radius to lock in stand up slides and pre-drifts like a boss. Freeride trucks generally have a higher degree between the base plate and axle. This gives the rider a steeper slope of motion for the hanger making it easier to get in and out of a slide with control. You will often find a barrel/cone or cone/cone bushing assembly in these trucks for the same reason. The higher the quality the truck is, the less you think about it as you ride. A good truck will give you more board feel and more stability. Don't forget to look at customizing the bushings to rider weight and skate style.

Carving/Cruising - Big California style carves, epic summertime adventures around the neighborhood, and everyday shenanigans are supported with trucks flexible enough to handle a bit of everything. You'll find these trucks often have a higher truck angle because this is what controls the amount of energy required to turn your board. Bigger angles equal big carves and a quick response to your movement. Stock bushings tend to be on the softer side for cruising making these trucks great for everyday use and for beginners alike. Make sure to go with the recommended truck width for your board to give you the best match and the most fun.

Hanger Style

Symmetrical Hanger - Symmetrical hangers are the standard. Sometimes it's best to go with what is tried and true. Symmetrical hangers will turn evenly as your weight is redistributed and are great for all kinds of skating.

Baseplate Angle

50° - Good for more effortless turning and carving, or for handling boards with longer wheel bases.

The truck angle you select will switch up how your board handles. A lower angle truck will require more lean for your turn, where as a higher angle will give you more turn for your lean. Generally speaking, higher angle trucks will be more suited for turning and carving and lower angle trucks will be more stable and better suited for speed.

Bushing Shape

Barrel/Cone - If you like cruising and carving, but also enjoy the thrill of the hill, you need a wide range of motion. With a boardside barrel and roadside cone you'll benefit from both stability and turnability. This the most common stock setup.

Non-Compatible Risers

Risers from the following brands are not compatible with the baseplates of these trucks.

Diamond, Independent, Paris
Sizing Reference

Note - Every skate truck brand represents their sizing a little differently, so it's easy to get confused. Take a look at this graphic and then reference the size chart.


Reverse Kingpin - Reverse kingpins offer increased stability at high speeds and generally provide more strength when compared to traditionally mounted trucks. The reverse nature of the kingpin makes the truck higher and usually heavier, giving you the best controlled turns for downhill bombing.

Size9.0 axle10.0 axle
Hanger (mm):160.0 184.0
Board Range (in):8.75 - 9.25 9.75 - 10.25
Height (mm):69.0 69.0
Weight (g):439.0 467.5
Overall Rating
Reviewed by 8 customers

Sort by

Quality RKP trucks
by Cynthia Finn in TN (Verified Buyer)
Posted on 2/5/2020
Caliber Caliber II Fifty Longboard Trucks - blackout
They are good mid priced RKP trucks , they do dent easily, but overall the build quality and tolerances are great. I got them for a landyachtz sidewalker relay to replace the stock regular kingpin trucks and they fit the bill nicely. Satisfied with the purchase and would buy again for any 9" longboard or cruiser board.
0 person has found this review helpful
by Andrew Smith in San Pedro, CA (Verified Buyer)
Posted on 5/24/2018
Caliber Caliber II Fifty Longboard Trucks - white gold
All around great set up
1 person has found this review helpful
Great trucks!!
by Scott Petersen in clayton, CA (Verified Buyer)
Posted on 6/19/2017
Caliber Caliber II Fifty Longboard Trucks - midnight satin blue
Awesome trucks, delivered on time.
Exactly as ordered, Thankyou
0 person has found this review helpful
Love them!
by LArry Lake in Brownsville, OR (Verified Buyer)
Posted on 3/4/2017
Caliber Caliber II Fifty Longboard Trucks - midnight satin blue
They're at the top of the game, no one single is the best but this is certainly one to own.
0 person has found this review helpful
No doubt the best trucks I've ever owned in the 37 years I've been riding.
by Todd Thirion in Saint Charles, MO (Verified Buyer)
Posted on 1/22/2017
Caliber Caliber II Fifty Longboard Trucks - raw silver
Love the reverse king pin. Makes in and out much less likely to get hung up unexpectedly. Being able to completely remove rake by flipping the hanger is killer too. By far the best out there and the price just cant be beat. First rate quality and performance.
0 person has found this review helpful
by Customer
Posted on 7/10/2016
Caliber Caliber II Fifty Longboard Trucks
Very responsive, one of the best trucks there are.
0 person has found this review helpful

Sort by

Asked by GIbran on 2/7/2017
Are these trucks as strong or long lasting as the Paris V2 50 degree trucks? Thank you.
Answered by Danny M (Tactics Employee) on 2/8/2017
These trucks are going to last you a while, definitely as strong as the Paris trucks.
2 people have found this answer helpful
Asked by Allison on 1/9/2017
Quantity of 1 provides 2 trucks?
Answered by Danny M (Tactics Employee) on 1/11/2017
Trucks come with a set of two!
3 people have found this answer helpful
Asked by Caleb on 6/13/2016
Can I take the cone bushing out and replace it with a barrel without any problems?
Answered by Elijah W (Tactics Employee) on 6/16/2016
Yeah these trucks will be able to switch that roadside bushing out for a barrel!
2 people have found this answer helpful

Recommended for you