This board is straight-up awesome and more versatile than you might think. Made for intermediate to advanced riders and born of a dope collab with Lost it's surfy in pow, precise on hardpack, and grippy over sheets of ice. Take it from the resort to the backcountry and let nature guide you to sick treeline runs and down the backside of the mountain. A mild taper helps with control while carving and on landings. The width allows room for even the biggest boot size while the shortened contact patch and three inch setback lets you still get mean edge to edge carves under way. A ding-resistant TNT base is extruded for easy maintenance, but thanks to the properties of its dual Fluoropolymer material, this is Lib's fastest unwaxed base, meaning it's faster than traditional extruded bases, but still just as resilient. And Lib's Correct Camber (C3) profile serves to increase power while maintaining precision. Get wild and ride the shape made by legendary surf shaper Matt Biolos.
C3 Camber/Banana Rocker Profile - Trapezoidal camber enhanced with Banana Tech for aggressive new traditionalists and weight lifters. Focuses a mild amount of pressure between your feet for carving, edge grip on ice and float in powder. Provides maximum pressure at the tip and tails for power and end-to-end stability.
Horsepower Construction (HP) - Lighter and smoother than Original Power Construction, in the HP construction Ultra high molecular weight (UHMW) materials are used in the sidewalls and tip/tail serving to deflect impacts and smooth out your ride. Overall this construction is considered light, environmentally nice, and smooth.
Note: The HP+ construction adds bamboo risers underneath the binding area for more efficient energy transfer throughout the board.
Aspen Wood - Light, strong, lively, fast growing, heat treated for maximum pop and long life.
Columbian Gold Wood - A lightweight, renewable wood core with loads of pop! This core provides increased response for precise turns when carving.
Paulownia Wood - Ultra light, strong, long lively fibers.
Birch Internal Sidewalls - Rugged, lightweight, vertical end grain Birch internal sidewalls add pop and durability where you need it when things get hard.
Bi-axial Fiberglass - This 2-way fiber orientation is engineered to increase snap and decrease chatter.
Tri-axial Fiberglass - This 3-way fiber orientation is engineered to provide maximum snap while decreasing chatter.
Basalt Fiber Reinforcement - Basalt is volcanic rock produced in a clean, pure process consisting of high heat without toxic additives. Not only is it safer for humans, it’s easier to recycle. Basalt fiber has strength properties much higher than fiberglass and better damping properties for a smooth ride.
TNT Base - TNT is a dual Fluoropolymer extruded base infused with Titanium and Teflon. A Lib Tech favorite for its durability, this is Lib Tech's fastest unwaxed base. TNT can be waxed less than a sintered base and will stay fast longer. Not as high maintenance as sintered, yet offers comparable performance.
Bio-Plastic Bean Topsheet - Lib Tech has made a commitment to using a new earth friendly, bio-plastic top skin made from beans that feature the highest strength-to-weight ratio of any top sheet in the industry.
UHMW Sintered Sidewalls - A Lib Tech innovation that is twice as sintered as most industry sidewalls. This ultra high molecular weight (UHMW) material increases durability, response and control for easier riding.
Mervin Made: EnvironMENTAL Construction - All Lib Tech snowboards are handcrafted by Mervin Manufacturing in the USA near Canada!
Mervin has been environmentally aware from the beginning - 25+ years!
No cancer-causing toxic automotive lacquer clearcoats.
Soy-based elastomer sidewalls instead of toxic ABS.
Made using renewable forest products for all snowboard cores. Fast growing trees have long fibers and natural pop. Wood is nature's fiberglass!
Made with only low VOC (Volatile Organic Compound) epoxy resin systems. Mervin's resin doesn't stink or make you dizzy.
Mervin uses water-cleansed grinding systems to minimize airborne particulate levels.
The Mervin Factory has 2700% air replacement ventilation systems.
All wood sawdust is recycled as soil additive, plus scrap wood is donated to a local Mood Wood company that packages it as kindling and resells it.
All scrap plastics (base cutouts, etc) are recycled and then reground to make new materials.
Water-based solvents used for cleansing (instead of petrochemical-based solvents).
Canola-based biodiesel heats the Mervin factory and is a renewable resource.
1 Year Warranty - Covered under manufacturer warranty for 1 year from the time of purchase. Warranty includes structural defects only and DOES NOT cover impact damage, abuse, misuse or normal wear and tear expected from aggressive riding.
Sorry folks, but bashing your board on a rock or rail does not qualify as a "manufacturer's defect" and will not be honored.
|Suggested Boot Size (US):||14 & under|
|Waist Width (cm):||26.9|
|Weight Range (lbs):||120+|
|Stance Set Back (in):||2.5|
|Sidecut Radius (m):||7.0|
|Tip Width (cm):||31.4|
|Tail Width (cm):||29.7|