R-II geometry also allows you to adjust the caster angle by flipping the hanger. Both baseplates are interchangeable within the Randal System.
Carving/Cruising - Big California style carves, epic summertime adventures around the neighborhood, and everyday shenanigans are supported with trucks flexible enough to handle a bit of everything. You'll find these trucks to have a higher truck angle because this is what controls the amount of energy required to turn your board. Bigger angles equal big carves and a quick response to your movement. Stock bushings tend to be on the softer side for cruising making these trucks great for everyday use and for beginners alike. Make sure to go with the recommended truck width for your board to give you the best match and the most fun.
Raked Hanger (Offset) - Raked hangers change the way you approach a corner. With a raked hanger, you can lean a lot further into a turn without the truck responding, but once you lean in far enough you'll get a lot of turn, fast. Designed with racing in mind, raked hangers can give you added stability when making minor body weight adjustments on your board, but for the same reason the transition into a corner can be a bit jerky. Once you learn when the truck will engage into a turn, it will start to feel amazingly responsive. Because your wheels will be going straight for longer you will go faster! So if you can handle it, go for it!
42° - Good for downhill use or for more stability on shorter wheel bases.
The truck angle you select will switch up how your longboard or cruiser handles. A lower angle truck will require more lean for your turn, where as a higher angle will give you more turn for your lean. Generally speaking, higher angle trucks will be more suited for turning and carving and lower angle trucks will be more stable and better suited for speed.
Barrical/Barrical - Freeride dreams are made of these. They are flexible, yet stable. You can flip them for different responses so experiment to find your groove. You can't go wrong with these.
Sizing Image - Every truck company seems to represent their truck sizing a little differently, so it's easy to get confused, particularly if you're new to skateboarding. To avoid any potential confusion take a look at this image and then reference the size chart.
Risers from the following brands are not compatible with the baseplates of these trucks.
Reverse Kingpin - Reverse kingpins offer increased stability at high speeds and generally provide more strength when compared to traditionally mounted trucks. The reverse nature of the kingpin makes the truck higher and usually heavier, giving you the best controlled turns for downhill bombing.
|Board Range (in):||7.25 - 7.75|