Ride Splitpig Splitboard 2022
Introducing the Splitpig - a limited edition, early release, split version of the ever popular Warpig, featuring the same flex and construction everybody loves with upgrades for extreme splitboarding.
- Directional Hybrid Camber
- Bi-Radial Sidecut
- Performance™ Core
- Thin Construction Tapered Tips
- Hybrid Triax/Biax Fiberglass
- Carbon Array 3 Carbon Stringers
- Double Impact Plates
- Sintered Low Friction Race Base
- Pomoca Climb 2.0 Mohair/Nylon Blend Skins
- Roll In Slimewalls®: Fiberglass Casing
- 3 Year Warranty
- Split Core
- Channel Binding Mounting System
- 3-Degree Cant
- Brushed Topsheet
Directional Hybrid Camber - A directional shape with a hybrid profile featuring rocker in the nose and a camber zone extending under the feet and through the tail.
Bi-Radial Sidecut - Combines a tight radius at the tip to provide quick, effortless turn initiation, with a wide radius at the tail to support a smooth and stable turn exit, this sidecut design maximizes grip while minimizing any loss of speed.
Slimewalls® - Ride’s exclusive Slimewalls® are forgiving and ductile, absorbing impacts rather than defending against them. Just like your skate wheels, the urethane in Slimewalls® absorbs impacts with snow, wood and metal surfaces. On top of all that, these babies are virtually indestructible.
Performance™ Core - High strength Aspen is combined with Bamboo and lightweight Paulownia wood to decrease weight while increasing strength.
Thin Construction Tapered Tips - ALL Ride boards feature tapered tips and tails to reduce swing weight and enhance tip flex.
Hybrid Triax/Biax Fiberglass - A layer of triaxial fiberglass on top of the board with biaxial on the base balances torsion and stiffness for better response at speed. Ride takes stitched glass to new levels and tailors it to each board's needs. Their unique glass designs are flatter and more consistent, which increases strength and prevents gaps or stretching that can be found in woven glass.
Carbon Array 3 Carbon Stringers - 3 widespread carbon stringers are placed at the binding zone to gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control.
Double Impact Plates - Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, single and double.
Sintered Low Friction Race Base - Built for speed. This structured race base uses the highest grade carbon-infused sintered base material available and comes with a stone ground finish.
Roll In Slimewalls®: Fiberglass Casing - Unique 3D fiberglass structure built around Ride's urethane Slimewalls® sidewalls. Designed to increase overall board strength, prevent topsheet chipping and reduce weight.
3 Year Warranty - Covered under manufacturer warranty for 3 years from the time of purchase. Warranty includes structural defects only and DOES NOT cover impact damage, abuse, misuse or normal wear and tear expected from aggressive riding.
Sorry folks, but bashing your board on a rock or rail does not qualify as a "manufacturer's defect" and will not be honored.
|Suggested Boot Size (US):||16 & under|
|Waist Width (cm):||27.0|
|Weight Range (lbs):||140+|
|Stance Set Back (in):||0|
|Sidecut Radius (m):||5.6 / 6.9|
|Tip Width (cm):||32.1|
|Tail Width (cm):||31.1|
|Stance Width (mm):||559.0|