Free U.S. Shipping - No Minimum
Free U.S. Shipping - No Minimum
Back to Results

O'Neill 1.5mm DL Psycho Wetsuit Gloves

Sale: $28.95 (40% off, was $47.95)
2 Reviews
O'Neill 1.5mm DL Psycho Wetsuit Gloves - black - view large
Color: black
Size: L
Color: black
Size: L
In Stock - Qualifies For FREE U.S. Shipping
The O'Neill 1.5mm DL Psycho wetsuit gloves are part of a radical new glove line, with every style sealed and bulletproof thanks to fluid seam welding and the new interior wrist seal. NOTE: MEN'S SIZING.
Max Thickness
  • 1.5mm
  • Glued and Blind Stitched (GBS)
  • 100% UltraFlex DS Neoprene
  • Fluid Seam Weld (100% Sealed)
  • Tacky Polygrip Pattern
  • Internal Wrist Gasket Seal
Max Thickness

The warmth of a wetsuit largely depends on the thickness of its neoprene. Measured in millimeters (mm), a thicker suit will generally keep you warmer. However, a thicker suit will also weigh more and be less flexible, resulting in greater paddling fatigue and reduced performance. The goal is to choose a suit that is not unnecessarily thick for your local conditions.

To achieve a balance between warmth and performance, most wetsuits use a combination of neoprene thicknesses. Thicker panels are generally used in the chest, back, and lower body, while thinner panels are used through the arms and shoulders for greater flexibility and easier paddling. A suit’s particular combination of neoprene thickness is reflected in the name of the suit itself. For example, a “4/3mm” wetsuit uses both 4mm and 3mm neoprene. A “2mm” wetsuit is made entirely of 2mm neoprene. The thickness we list here refers only to the thickest neoprene used in the suit. More detailed information on the thicknesses used and their placement is listed below.

Keep in mind that additional features such as advanced seam construction, insulated lining, and hoods greatly impact the warmth of a wetsuit. The presence of these features can compensate for the reduced warmth of thinner neoprene, offering greater performance while retaining overall warmth. For example, a higher-end 4/3mm wetsuit with sealed seams and interior thermal lining will likely stay as warm as an economical 5/4mm wetsuit that does not have those features.


In a perfect world, wetsuits would be seamless. Until then, the goal is to make seams as light, flexible, durable, and impermeable to water as possible. While each brand has its own lingo, there are four basic seam constructions on the market: flatlock; glued and blind stitched (GBS); glued and blind stitched with taping; and liquid rubber seam seal.

Glued and Blind Stitched (GBS) - A durable, flexible, and waterproof seam construction where two panels of neoprene are glued together end-to-end and then blind stitched. Stitches are visible on the seam exterior but do not protrude through to the interior, reducing sew-through holes and water entry.

Overall Rating
Reviewed by 2 customers

Sort by

top notch
by Pranqster in Morro Bay, CA (Verified Buyer)
Posted on 1/14/2017
O'Neill 1.5mm DL Psycho Wetsuit Gloves - black
nice, warm gloves. thin enough to be comfortable. highly recommended.
0 person has found this review helpful
Plenty warm for most PNW conditions
by Matt P. in Eugene, OR (Tactics Employee)
Posted on 5/4/2012
O'Neill 1.5mm DL Psycho Wetsuit Gloves - black
It would be nice not to need gloves but I have terrible hand circulation and surf in the Pacific Northwest with water temps averaging 50-55 degrees so I typically need some protection. Even then this 1.5mm is all I need. Over time and a lot of use, these gloves may develop a small hole in the seam between fingers. To me, that's the price to pay for flexible gloves with minimal bulk.
1 person has found this review helpful

Recommended for you