Free Shipping - Orders Over $60
Free Shipping - Orders Over $60

Bear Grizzly Gen 6 50 Degree Longboard Trucks

1 Review
astral blue 180mm
Color: astral blue 180mm
Size: 9.75 axle
Color: astral blue 180mm
Size: 9.75 axle
In Stock
FREE Shipping on orders over $60
  • Set of 2 Trucks
Ride Style
  • Freeride
  • Carving/Cruising
Baseplate Angle
  • 50°
Hanger Style
  • Raked Hanger (Offset)
Bushing Shape
  • Barrel/Cone
Specialized Casting Formula
  • Custom aluminum alloy formula, specifically mixed for this truck and not pulled from some generic melted down block.
Widened Rear Baseplate Legs
  • Added thickness to eliminate baseplate warping and help withstand heavy impacts.
Effective Bushing Seat
  • Fully-wrapped leaning system with bushing base lock-in. This allows you to get extra lean and no turning restrictions. Compatible with most bushings.
Flippable Hanger
  • The positive (standard) and negative (flipped) leverage axle placement helps you change your setup from general carving to a stable hill bombing machine in seconds.
  • Reverse Kingpin
Ride Style

Freeride - You need responsive trucks with charged rebound and a large turning radius to lock in stand up slides and pre-drifts like a boss. Freeride trucks generally have a higher degree between the base plate and axle. This gives the rider a steeper slope of motion for the hanger making it easier to get in and out of a slide with control. You will often find a barrel/cone or cone/cone bushing assembly in these trucks for the same reason. The higher the quality the truck is, the less you think about it as you ride. A good truck will give you more board feel and more stability. Don't forget to look at customizing the bushings to rider weight and skate style.

Carving/Cruising - Big California style carves, epic summertime adventures around the neighborhood, and everyday shenanigans are supported with trucks flexible enough to handle a bit of everything. You'll find these trucks often have a higher truck angle because this is what controls the amount of energy required to turn your board. Bigger angles equal big carves and a quick response to your movement. Stock bushings tend to be on the softer side for cruising making these trucks great for everyday use and for beginners alike. Make sure to go with the recommended truck width for your board to give you the best match and the most fun.

Baseplate Angle

50° - Good for more effortless turning and carving, or for handling boards with longer wheel bases.

The truck angle you select will switch up how your board handles. A lower angle truck will require more lean for your turn, where as a higher angle will give you more turn for your lean. Generally speaking, higher angle trucks will be more suited for turning and carving and lower angle trucks will be more stable and better suited for speed.

Hanger Style

Raked Hanger (Offset) - Raked hangers change the way you approach a corner. With a raked hanger, you can lean a lot further into a turn without the truck responding, but once you lean in far enough you'll get a lot of turn, fast. Because your wheels will be going straight for longer you will go faster so if you can handle it, go for it!

Bushing Shape

Barrel/Cone - If you like cruising and carving, but also enjoy the thrill of the hill, you need a wide range of motion. With a boardside barrel and roadside cone you'll benefit from both stability and turnability. This the most common stock setup.

Non-Compatible Risers

Risers from the following brands are not compatible with the baseplates of these trucks.


Reverse Kingpin - Reverse kingpins offer increased stability at high speeds and generally provide more strength when compared to traditionally mounted trucks. The reverse nature of the kingpin makes the truck higher and usually heavier, giving you the best controlled turns for downhill bombing.

Size9.75 axle
Hanger (mm):180.0
Board Range (in):9.5 +
Height (mm):64.0
Overall Rating
Reviewed by 1 customers

Sort by

Carving for days and high speed stability
by William Kozielski in Wappingers Falls, NY (Verified Buyer)
Posted on 8/19/2021
Bear Grizzly Gen 6 50 Degree Longboard Trucks - astral blue 180mm
Great quality especially with reversible hanger. I can hit turns on my old school deck with these trucks better than any long board I own
0 person has found this review helpful