Modus skate risers raises your deck's wheel clearance to prevent pesky bite.
Quantity
Set of 2 Risers
Features
Suggested Hardware
Hardware Compatibility Explained - Longer bolts are needed to accommodate the addition of risers. Deck thickness is another factor in this. Reference the chart below to find out what length hardware your setup will require. These are the suggested standard, you can go longer, just don't go shorter.
Specs
Size
1/8in
Hardware Length for Standard 7-Ply Decks (in):
1 1/8
Hardware Length for Thicker 8/9-Ply Decks (in):
1 1/4 - 1 1/2
Reviews
4.7
Overall Rating
Reviewed by
10
customers
Ive risen
by William Rabbermann
in SAINT LOUIS, MO(Verified Buyer)
Posted on 7/30/2023
Modus Skate Risers - blue
1/8 of an inch
0person has found this review helpful
nice
by Milo Stevens
in Carlsbad, CA(Verified Buyer)
Posted on 9/30/2021
Modus Skate Risers - black
??
0person has found this review helpful
Do the job, but definitely room for improvement
by Mike
Posted on 7/11/2018
Modus Skate Risers
They will do the job, but on my Thunders there's a gap on the inside of the baseplate, so consequently they stick out too far on the outer (nose/tail) edge. I expected they may stick out slightly, but not to this degree. At least they are only a few bucks. Wont purchase this brand next time.
2people have found this review helpful
Awesome risers
by Rob B.
in NM(Verified Buyer)
Posted on 4/21/2018
Modus Skate Risers - black
Good feel to the board!
0person has found this review helpful
Back to my roots
by Rob B.
in NM(Verified Buyer)
Posted on 4/21/2018
Modus Skate Risers - blue
I used to skate with risers/shock pad in my younger days. Recently got these and am digging them. No more wheel bites and not too sure but it seems to help with pop as well.
1person has found this review helpful
Revolutionary
by Reuben Wagner
in Fort Bragg, CA(Verified Buyer)
Posted on 6/16/2017
Modus Skate Risers - blue
Modus only seems to put out high quality there risers being no exception, there was no smell of gnarly plastic even getting right up to it and it was slightly flexible like it had rubber or some softer plastic in it a plus in my opinion, way better than lucky Indy or mini logo risers word to the wise spend the extra dollar plus this riser when put on has a little bit of overlap for added protection and no "lining everything up" and the bolts fit perfectly threw the holes all around Revolutionary. If you ride bones redds try modus abec 5s be mind blown
6people have found this review helpful
Asked by grape escape on 2/14/2018
Two questions: do these fit flush with the Indy standard base plates (55m) and/or do these fit flush with Indy forged base plates?
Answered
by Graig A
(Tactics Employee)
on 2/15/2018
These fit close to flush on both but do have some over hang around the entire base plate on both styles.
1person has found this answer helpful
Asked by Larry Chen on 1/9/2018
Do these fit flush with Thunder base plates?
Answered
by Hunter H
(Tactics Employee)
on 1/10/2018
These will not fit entirely flush with a Thunder base plate, as they will stick slightly stick out around the edges.
0person has found this answer helpful
Asked by timmyp on 12/26/2016
are these rubber
Answered
by James D
(Tactics Employee)
on 12/29/2016