Hydration is key and when you are active on the mountain it's beneficial to have water close by. An internal Hydrastash® reservoir is BPA free and Anti-Microbial with a .75L reserve for swift re-hydration. With jacket to pant interface, you can customize your ensamble effortlessly, so you can enjoy being protected from the elements in style.
- infiDRY® 20k Stretch Fabric + DWR
- Fully Taped
- Fixed Hood
- Polyester Fill
- Body: 80
- Sleeves: 60
- Hood: 40
- infiLOFT Clo® Univa Duo 70% Recycled Insulation
- Dual Zipper Chest Pockets.
- Front Hand Pockets.
- Inner Smart Phone Pocket with Audio Cord Outlet.
- Internal 686 Jacquard Mesh Goggle/Storage Pocket.
- Zippered Sleeve Pass Pocket with Key Clip.
- Front Hand Pocket Inner Key Clip.
- Under Arm
- Articulated Fit
- Bemis® Seam Tape
- InfiDRY® Fabric Construction
- Hydrastash® Built-In Hydration System
- Vader Vent at Collar
- YKK® AquaGuard Waterproof Zippers
- Adjustable Cuffs
- Lycra® Wrist Gaiters
- Adjustable Hem System
- Jacket to Pant Interface
- Adjustable Helmet Compatible Hood.
- Hood Link System.
- Waffle Knit Fleece Inner Collar/Mouth Flap.
- Tangle Free Headphone Loops.
- Inner Thumb Grip.
- Attached Adjustable Powder Skirt.
- Adjustable Bottom Hem Cinch.
- Lifetime Warranty.
Fully Taped - Having outerwear with fully taped seams means that on the inside of the jacket all the seams are covered in tape to provide the most effective waterproofing. It can be considered a key feature if you live in a wet climate or are planning on wearing the jacket during heavy rains. The downside is that due to the full taping there is less breathability than you'd experience with critically taped seams.
Polyester Fill - Polyester insulation may not be as warm or light as down, but it's far easier to clean and performs better in wet conditions. If cost is a concern or you live in a wet climate then polyester insulation might be your best option.
Synthetic insulation is measured in grams, so a jacket with a 80g rating simply means that a 1 meter by 1 meter piece of that particular jacket's insulation weighs 80 grams. The higher the rating, the warmer the outerwear.
Articulated Fit - Engineered to explore. Ergonomically engineered fits are designed to work with your body as you explore the backcountry, sending it off your favorite park jump or just ripping around the resort.
Helmet compatible hood
No-Rise sleeve cap design
Bemis® Seam Tape - All 686 taped seams feature Bemis® branded taping to further ensure quality workmanship.
InfiDRY® Fabric Construction - Using specialty fabrics and modern lamination techniques InfiDRY® fabrics are layered in a way that provides a one-way portal for moisture that is virtually impenetrable from the outside, yet allows your body’s sweat to evaporate and pass through the fabric from the inside out.
Hydrastash® Built-In Hydration System - Securely holds a water reservoir in a newly designed powder skirt system.
BPA Free Anti-Microbial .75L Reservoir
Easy Fill Waterproof Roll Top Opening
BPA Free Microbite™ Valve
Slim Bite Valvebite
BPA Free Micro Tubing
Internal Reservoir Stretch Suspension Straps
Zippered Easy-Access Stretch Channel
Vader Vent at Collar - A jacket hood with a more technically constructed laminated and perforated front collar venting system.
YKK® AquaGuard Waterproof Zippers - The world's most trusted waterproof zipper. YKK AquaGuard zippers ensure smooth movement and water resistance out in the elements.
Lycra® Wrist Gaiters - Soft, stretchy Lycra® fends off the cold without adding bulk or restricting movement.
Jacket to Pant Interface - Connect your jacket to your pants for better protection from the elements.