The Hydrastash® Reservoir Insulated jacket contains a built-in hydration system, providing 25oz of hands free hydration without needing to carry a water bottle or a backpack. Designed around a body in motion, the Hydrastash® system comfortably fits tightly around your center of gravity, removing the water weight around your shoulders, and reducing the sloshing of the water. InfiDry® fabric with fully taped Bemis® seams and YKK® AquaGuard® water resistant zippers provide a breathable waterproof barrier against the elements. Warm polyester filling insulates your body and keeps the water in the reservoir from freezing. Adjustable cuffs, and hood give you a custom fit, and wrist gaiters make any glove easily integrate with the jacket. Push your limits while staying warm and hydrated in the Hydrastash® Reservoir Insulated jacket from 686.
- infiDRY® Stretch Fabric
- Fully Taped
- Fixed Hood
- Polyester Fill
- Body: 80
- Sleeves: 60
- Hood: 40
- Dual Handwarmer Pockets
- Zippered Sleeve Pass Pocket
- Internal Mesh Goggle Storage Pocket
- Inner Media Audio Pocket with Cord Outlet
- Lip Balm Pocket
- Under Arm
- Mesh Gussets
- Articulated Fit
- Bemis® Seam Tape
- InfiDRY® Fabric Construction
- Hydrastash® Built-In Hydration System
- Vader Vent at Collar
- YKK® AquaGuard Waterproof Zippers
- 2-Way Adjustable Hood
- Adjustable Cuffs
- Insulated Lycra® Wrist Gaiters
- Jacket to Pant Interface
- Tangle Free Headphone Loops
Fully Taped - Having outerwear with fully taped seams means that on the inside of the jacket all the seams are covered in tape to provide the most effective waterproofing. It can be considered a key feature if you live in a wet climate or are planning on wearing the jacket during heavy rains. The downside is that due to the full taping there is less breathability than you'd experience with critically taped seams.
Polyester Fill - Polyester insulation may not be as warm or light as down, but it's far easier to clean and performs better in wet conditions. If cost is a concern or you live in a wet climate then polyester insulation might be your best option.
Synthetic insulation is measured in grams, so a jacket with a 80g rating simply means that a 1 meter by 1 meter piece of that particular jacket's insulation weighs 80 grams. The higher the rating, the warmer the outerwear.
Articulated Fit - Engineered to explore. Ergonomically engineered fits are designed to work with your body as you explore the backcountry, sending it off your favorite park jump or just ripping around the resort.
Helmet compatible hood
No-Rise sleeve cap design
Bemis® Seam Tape - All 686 taped seams feature Bemis® branded taping to further ensure quality workmanship.
InfiDRY® Fabric Construction - Using specialty fabrics and modern lamination techniques InfiDRY® fabrics are layered in a way that provides a one-way portal for moisture that is virtually impenetrable from the outside, yet allows your body’s sweat to evaporate and pass through the fabric from the inside out.
Hydrastash® Built-In Hydration System - Securely holds a water reservoir in a newly designed powder skirt system.
BPA Free Anti-Microbial .75L Reservoir
Easy Fill Waterproof Roll Top Opening
BPA Free Microbite™ Valve
Slim Bite Valvebite
BPA Free Micro Tubing
Internal Reservoir Stretch Suspension Straps
Zippered Easy-Access Stretch Channel
Vader Vent at Collar - A jacket hood with a more technically constructed laminated and perforated front collar venting system.
YKK® AquaGuard Waterproof Zippers - The world's most trusted waterproof zipper. YKK AquaGuard zippers ensure smooth movement and water resistance out in the elements.
Insulated Lycra® Wrist Gaiters - Soft, stretchy insulated Lycra® fends off the cold without adding bulk or restricting movement.
Jacket to Pant Interface - Connect your jacket to your pants for better protection from the elements.