686 and Coors Light have come together to bring you the Sixer Coors Light Insulated Jacket. Bring the good times with you in the insulated cooler pockets for beverage storage. InfiDRY® fabric with full Bemis® taping gives you durable waterproof and breathable protection. Mesh gusseted under arm vents release heat quickly and the adjustable cuffs and hood seal up tight to keep out the snow. The zip-out powder skirt adjusts for a snug fit and has a loop to connect to your snow pants. An assortment of pockets keep your gadgets secure, and headphone loops keeps your cords from getting tangled up. Be fully stocked wherever you are on the mountain, Cheers!
Fully Taped - Having outerwear with fully taped seams means that on the inside of the jacket all the seams are covered in tape to provide the most effective waterproofing. It can be considered a key feature if you live in a wet climate or are planning on wearing the jacket during heavy rains. The downside is that due to the full taping there is less breathability than you'd experience with critically taped seams.
Polyester Fill - Polyester insulation may not be as warm or light as down, but it's far easier to clean and performs better in wet conditions. If cost is a concern or you live in a wet climate then polyester insulation might be your best option.
Synthetic insulation is measured in grams, so a jacket with a 80g rating simply means that a 1 meter by 1 meter piece of that particular jacket's insulation weighs 80 grams. The higher the rating, the warmer the outerwear.
Bemis® Seam Tape - All 686 taped seams feature Bemis® branded taping to further ensure quality workmanship and guaranteed waterproofing.
InfiDRY® Fabric Construction - 686 InfiDRY® fabric is perfect for daily use in a wide range of conditions. Specialty fabrics are laminated and bonded to a Polyurethane (PU) InfiDRY® membrane on the underside of the fabric. This membrane blocks water and snow from entering your garment, yet is hydrophilic on the inside - attracting any moisture inside your jacket (sweat) and moving it through to the outside of the fabric where it is able to evaporate, thus keeping you both dry and warm.
For further protection, the laminated fabric is then coated on the exterior with a water resistant DWR coating to repel snow and water from penetrating the fabric. This creates a superior fabric with a one-way portal for moisture that is virtually impenetrable from the outside, yet allows your body’s sweat to evaporate and pass through the fabric from the inside out creating a more comfortable riding experience.
Death Grip Adjustable Cuffs - 2-way adjustable cuff tabs worn around the thumb or wrist.
Chafe Free Collar - Extra soft tricot liner to protect your face.
Jacket to Pant Interface - Connect your jacket to your pants for better protection from the elements.
DWR Coating - A Durable Water Resistant finish applied to the exterior of the garment.