Dual Zone BOA Coiler Lacing + New England Rope - All Burton men’s, women’s, and youth boots with Boa have been upgraded with the virtually indestructible, Warrantied for Life performance of Burton-exclusive New England Rope laces.
Built with a re-designed inner Coiler spool to route the laces, the dial-it-in system retains its quick, easy, and effective lace adjustment. Natural fiber ropes equal a more natural flex and feel for greater all-day comfort. The dual zone system quickly loosens or tightens with simple twists of the Boa dail.
Wishbone Upper Cuff - The Wishbone Cuff combines power and freedom into one. An update to Burton's Crossbone Cuff, the Wishbone features Jumper Cable carbon stringers (same stuff found in Burton's high-end boards) on both the inside and outside of the ankle of the shell for twice the snap, rebound, and life without sacrificing the high tweakability of a softer boot.
ReBounce Cushioning Underfoot - More comfort and more warmth is the Burton-exclusive upgrade of Rebounce Cushioning. The extra hops are accomplished by surrounding the foot inside the shell of the boot with a two-layer 3D laminate of cushy PU plus reflective material, which not only reduces impact and absorbs chatter but also turns heat inward.
Sleeping Bag Reflective Foil Underfoot - This low-profile and lightweight foil underneath your liner reflects heat back to the feet, improving both warmth and comfort when faced with cold conditions.
Shrinkage Footprint Reduction Technology - Shrinkage reduces the boot's overall footprint one full size, meaning a men's size 10 fits like a size 10, but has the footprint of a typical size 9. Shorter, lighter, sleeker. Never suffer from toe drag again.
Low-Profile EST Midsole Design - Lower profile, lighter weight, and with a reduced ramp angle, EST optimized soles lower your center of gravity and improve feel. Control your setup like never before without sacrificing an ounce of cushioning thanks to ultra dampening B3 Gel inserts.
EST goes beyond bindings by drawing inspiration from the surf/skate heritage of snowboarding and giving you a more direct connection to your board.
Imprint 3 Liner - Heat-Moldable so whether you have funky cankles or a crazy sixth toe, rest assured that your feet will be wrapped in total comfort.
Focus Cuff Heel Hold System boosts heel-hold by hugging that sweet spot around your ankle while riding slightly higher for increased response.
Velcro J-Bar Interface allows you to add or remove support to the boot’s heel pocket for a customized fit.
Inner Lace Lock makes exiting a cinch with the one-handed release tab.
Aegis™ Antimicrobial Coating inhibits the growth of odor-causing bacteria. Your feet and your friends will thank you for sure.
Lightweight Power Panels ensure that your boots provide the same flex, rebound and support on day 100 as they did on day 1. They’re built using memory materials, which even after being deeply flexed, enable both the liner and shell to snap back into their original position.
Sock Lock helps fight off sliding-sock syndrome so your ankles stay sweat-free.
Rad Pad is located on the top of your instep, right where the liner laces exert the most pressure, these pre-curved panels keep your feet stoked and secure.
Velcro Liner Closure provides legendary convenience with long-lasting hold for easy open and close action.
Level 2 Molded EVA Footbed offers enhanced arch support, improved response, and even more shock absorbing power.
ESS Support Shank adds support to reduce fatigue while preventing your arch from collapsing on itself when you bomb drop a 40-footer.
Focus Cuff Liner Wrap - Boosting heel-hold by hugging that sweet spot around your ankle, the Focus Cuff rides slightly higher on your ankle for increased response.
Flex Notches - These strategically placed flex notches allow for smoother, more fluid lateral and medial flex, perfect for pressing and tweaking while also reducing pressure points and the dreaded boot bulge when flexing.
GripLITE Backstay - Snuggling up the fit between boot and hi-back, the GripLITE rubber backstay also shaves weight and enhances grip. The result of GripLITE is a more direct transfer from boot to binding to board for reduced rider fatigue.
Medium Flex Thin Profile 3D Molded Tongue - Adjusting the profile of the tongue's thickness controls its flex, enhances its ability to wrap the forefoot, and reduces shell/liner stack up for improved comfort. Offered in soft, medium, and firm flexing options based on the ride of each boot.
PowerUP Tongue - This dual density tongue offers greater response than the previous Thin Profile 3D Molded tongue with improved rebound and durability.
Snow-Proof Internal Tongue Gusset - All Burton boot tongues have been upgraded with an internal gusset construction to completely seal the lower zone of the boot, keeping feet warm and dry.
DynoBITE Outsole - In addition to ReBounce which wraps the cushioning in heat-reflective foil to keep it cushy and effective in cold weather, the DynoBITE outsole features an extra layer of traction at the toe and heel for greater grip. Like every Burton Dyno outsole, DynoBITE provides lightweight, durable cushioning that’s formulated specifically for snowboarding.
EVA Sole Cushioning - Lightweight and long lasting shock absorption to reduce foot fatigue from vibration and harsh landings. Keeps you riding longer and stronger.
Total Comfort Construction - Get an instantly broken in feel right out of the box. Total Comfort's new industry exclusive toe box construction eliminates the break in period for a fit that feels just as good from shop floor to season opener, and every day thereafter.
1:1 Boot Lasting - Every Burton liner is factory molded with the "Last" inside the shell to ensure a superior, out-of-box fit with precise, liner-to-shell integration. 1:1 lasting means that every half and full size liner gets a matching half and full size shell and outsole for the best possible fit with the smallest possible footprint.
1 Year Warranty - Covered under manufacturer warranty for 2 years from the time of purchase. Warranty includes manufacturer defects in materials and workmanship only and DOES NOT cover damage due to normal wear and tear, damage from resting your board's edge on your boot while on the chairlift, or damage caused by any modification done outside the manufacturer's facility.