A traditional lacing system in a medium-flex boot makes these suitable for the whole mountain. The new Kendo boots feature footprint reduction technology for a sleeker design that helps eliminate toe-drag. In addition, premium Imprint™ 3 liners with ReBounce cushioning underfoot help stave off fatigue.
- ReBounce Cushioning Underfoot
- Sleeping Bag Reflective Foil Underfoot
- Shrinkage Footprint Reduction Technology
- Imprint™ 3 Liner
- Focus Cuff Liner Wrap
- Articulating Boot Cuff
- Firm Flex Thin Profile 3D Molded Tongue
- PowerUP Tongue
- Snow-Proof Internal Tongue Gusset
- AutoCANT Sole Cushioning
- EST® Optimized Midsole
- Recycled Rubber Outsole
- Total Comfort Construction
- 1:1 Boot Lasting
- 1 Year Warranty
- Exo-Wrap Reinforced Two-to-One Lower Zone Lacing
ReBounce Cushioning Underfoot - More comfort and more warmth is the Burton-exclusive upgrade of Rebounce Cushioning. The extra hops are accomplished by surrounding the foot inside the shell of the boot with a two-layer 3D laminate of cushy PU plus reflective material, which not only reduces impact and absorbs chatter but also turns heat inward.
Sleeping Bag Reflective Foil Underfoot - This low-profile and lightweight foil underneath your liner reflects heat back to the feet, improving both warmth and comfort when faced with cold conditions.
Shrinkage Footprint Reduction Technology - Shrinkage reduces the boot's overall footprint one full size, meaning a men's size 10 fits like a size 10, but has the footprint of a typical size 9. Shorter, lighter, sleeker. Never suffer from toe drag again.
Imprint™ 3 Liner - Level 2 Molded EVA Footbed offers enhanced arch support, improved response, and even more shock absorbing power.
Focus Cuff Heel Hold System boosts heel-hold by hugging that sweet spot around your ankle while riding slightly higher for increased response.
Hook and Loop J-Bar Interface allows you to add or remove support to the boot’s heel pocket for a customized fit.
Inner Lace Lock makes exiting a cinch with the one-handed release tab.
Aegis™ Antimicrobial Coating inhibits the growth of odor-causing bacteria. Your feet and your friends will thank you for sure.
ESS Support Shank adds support to reduce fatigue while preventing your arch from collapsing on itself when you bomb drop a 40-footer.
Lightweight Power Panels ensure that your boots provide the same flex, rebound and support on day 100 as they did on day 1. They’re built using memory materials, which even after being deeply flexed, enable both the liner and shell to snap back into their original position.
Hook and Loop Liner Closure.
Focus Cuff Liner Wrap - Boosting heel-hold by hugging that sweet spot around your ankle, the Focus Cuff rides slightly higher on your ankle for increased response.
Articulating Boot Cuff - Allowing the upper and lower zones of the boot to flex independently creates fluid forward motion, minimizes shell distortion, and maximizes heel hold and response.
Firm Flex Thin Profile 3D Molded Tongue - Adjusting the profile of the tongue's thickness controls its flex, enhances its ability to wrap the forefoot, and reduces shell/liner stack up for improved comfort. Offered in soft, medium, and firm flexing options based on the ride of each boot.
PowerUP Tongue - This dual density tongue offers greater response than the previous Thin Profile 3D Molded tongue with improved rebound and durability.
Snow-Proof Internal Tongue Gusset - All Burton boot tongues have been upgraded with an internal gusset construction to completely seal the lower zone of the boot, keeping feet warm and dry.
AutoCANT Sole Cushioning - Dual density EVA allows your foot to settle into the most natural and relaxed position, resulting in improved comfort, reduced fatigue, and smoother, more direct board control.
EST® Optimized Midsole - EST® provides you with a more direct connection to your board by eliminating the ramp angle of your outsole. This in turn lowers your center of gravity and improves board feel to create a more surf/skate like feel without sacrificing on cushioning.
Total Comfort Construction - Get an instantly broken in feel right out of the box. Total Comfort's new industry exclusive toe box construction eliminates the break in period for a fit that feels just as good from shop floor to season opener, and every day thereafter.
1:1 Boot Lasting - Every Burton liner is factory molded with the "Last" inside the shell to ensure a superior, out-of-box fit with precise, liner-to-shell integration. 1:1 lasting means that every half and full size liner gets a matching half and full size shell and outsole for the best possible fit with the smallest possible footprint.
1 Year Warranty - Covered under manufacturer warranty for 1 year from the time of purchase. Warranty includes manufacturer defects in materials and workmanship only and DOES NOT cover damage due to normal wear and tear, damage from resting your board's edge on your boot while on the chairlift, or damage caused by any modification done outside the manufacturer's facility.