Jones Meteorite Snowboard Bindings (Closeout) 2023
The Meteorite is a tech-packed binding built for all-mountain riders looking for something stable and comfortable with a tweak-able medium to medium-soft flex. The Dynamic Flex highback offers a dynamic flex (hence the name) with a stiff center for solid support and softer edges for friendly maneuverability, plus you can set this binding up in Surf Mode or Freeride mode by flipping the straps and swapping the bushings depending on the level of response needed on any given day.
- Skate Tech™ Base
- Freeride + Surf Mode
- Dynamic Flex Highback
- Flushcup Technology
- Comfort Foot Pillow Cusioning
- Hanger 2.0
- Power Spine Ankle Straps
- Asym Buckles
- Hinge Connector Strap Attachment + Pre-curved Ladders
- Lifetime Warranty (Limited, See Details)
Skate Tech™ Base - An added "Hanger" acts as a lever that transfers energy input from the straps to the “Bushings” and onto the board edges. The “Kingpin” acts as the fulcrum for the “Hanger” and magnifies the energy transfer through leverage. Your feet stay more relaxed and comfortable because the bindings transfer power to the board with less work.
Freeride + Surf Mode - Jones bindings offer customizable damping and response by switching between Surf Mode and Freeride Mode.
Freeride Mode: Keeps you locked in for maximum response. Position the wide half of the strap above the buckle for more lateral support and board response. Use Hard Bushings.
Surf Mode: Lets you tweak harder. Position the wide half of the strap below the buckle for solid heel support but more ankle flexibility for getting loose. Use Soft Bushings.
Dynamic Flex Highback - The Dynamic Flex highback is stiff in the center for solid support and softer on the sides for friendly maneuverability.
Flushcup Technology - Stacked highback / heelcup assembly creates a flush, inner surface.
Heelcup design prevents heel lift with or without the highbacks.
Noback mode built-in design.
Comfort Foot Pillow Cusioning - Full length EVA foam footbed that maximizes binding comfort while minimizing foot fatigue. The 3D molded footbed surface offers supreme traction for any boot tread pattern and prevents snow build-up.
Hanger 2.0 - Nylon Reinforced with 30% Fiberglass, this new binding hanger design featuring a wider bushing footprint that’s closer to the edges for enhanced board connection and faster energy transfer. The Hanger 3.0 is also lighter weight and has a lower inner lateral wall for better ankle mobility and high volume boot fit.
Kingpin - A stainless steel Kingpin creates a fulcrum that magnifies edge to edge energy transfer through leverage (uses 4mm Allen key hardware).
Hanger - Made from Nylon reinforced with 30% fiberglass, it's a lever that pivots on Kingpin. Transfer energy input from straps to bushings and onto board edges. The baseless design allows for even board flex.
Bushings - Offers a customizable damping system.
Post - Made from Nylon and recycled Carbon, this is the connection between binding and board.
Power Spine Ankle Straps - New two-part molded ankle strap with a wider bottom section for flexible comfort and a stiffer center spine for unmatched response. Flip-it Strap compatible (Freeride mode + Surf Mode).
Asym Buckles - Bombproof buckles made from aircraft-grade alloy featuring ultra-strong levers and springs. Triple action ratchet design increases speed of entry and release.
Lifetime Warranty (Limited, See Details) - Covered by the manufacturer's lifetime warranty on binding Hanger and Post. One year manufacturer's warranty on all other binding components.
|Men's Boot Sizes (US):||7.5 - 10||10.5+|