The MTNPIG is a freeride shredder with a tapered, directional hybrid profile that's ready to rip anything. Having rocker on the tip and tail keeps the board floating in deep powder while the camber underfoot maximizes control with dependable edge hold. Carbon Stringers, Carbon Infused Fiberglass, and Carbon Slimewalls® provide response and vibration damping for the smoothest ride possible without stiffening the board's overall flex. From pillow lines to groomers and everything in between, the MTNPIG is sure to keep you smiling through the last chair.
Directional Hybrid Camber - A directional shape with a hybrid profile featuring rocker in the nose and a camber zone extending under the feet and through the tail.
Quadratic Sidecut - The Quadratic sidecut blends three radii from tip to tail to improve turn initiation and exit while providing the best grip possible. This design is uniquely formulated for each model based on its shape and riding style.
Carbon Slimewalls® - This totally unique sidewall combines layers of Slimewalls® material and carbon strategically placed at the inserts out to the contact points in the tip and tail. This exclusive tech enhances the charging rider's experience with better stability and increased response.
Performance™ Core - High strength Aspen is combined with Bamboo and lightweight Paulownia wood to decrease weight while increasing strength.
Thin Construction Tapered Tips - ALL Ride boards feature tapered tips and tails to reduce swing weight and enhance tip flex.
Carbon Infused Fiberglass - 90° Carbon fibers are stitched into the glass to provide extra pop and response, without adding extra stiffness.
Carbon Array 5 Carbon Stringers - 5 widespread carbon stringers are placed at the binding zone to gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control.
Double Impact Plates - Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, single and double.
Sintered Base - This high end sintered 4000 Ptex base material is more durable, harder and faster than extruded.
Transworld Good Wood Award Winner - Selected as a Good Wood winner by Transworld Magazine - chosen for quality snowboard construction and rideability.
Birch Veneer Topsheet - Real wood Birch veneer topsheet sealed with urethane for a unique look and a smooth ride.
Roll In Slimewalls®: Fiberglass Casing - Unique 3D fiberglass structure built around Ride's urethane Slimewalls® sidewalls. Designed to increase overall board strength, prevent topsheet chipping and reduce weight.
3 Year Warranty - Covered under manufacturer warranty for 3 years from the time of purchase. Warranty includes structural defects only and DOES NOT cover impact damage, abuse, misuse or normal wear and tear expected from aggressive riding.
Sorry folks, but bashing your board on a rock or rail does not qualify as a "manufacturer's defect" and will not be honored.
|Suggested Boot Size (US):||10.5 & under||11.5 & under||14 & under|
|Waist Width (cm):||25.2||25.7||26.8|
|Weight Range (lbs):||130 - 180||140 - 190||170+|
|Stance Set Back (in):||.75||.75||.75|
|Sidecut Radius (m):||10 / 7.3||10.1 / 7.6||10.2 / 7.7|
|Effective Edge (cm):||121.3||123.8||125.1|
|Tip Width (cm):||29.7||30.3||31.4|
|Tail Width (cm):||29.2||29.8||30.9|