Designed for all-mountain riders, the Warpig allows users to downsize from their normal board size without sacrificing stability and response in a variety of snow conditions. The shorter, wider and tapered profile of the Warpig board allows it to be very maneuverable for tight tree runs and quick laps through the park, while the large surface area of the base and directional rocker profile ensures you have all the float you need when the snow gets deep. Make sure to check out the rider weight recommendations before deciding on board-size, as this will have a greater impact on this particular board.
- Directional Rocker
- Bi-Radial Sidecut
- Performance™ Core
- Thin Construction Tapered Tips
- Hybrid Triax/Biax Fiberglass
- Carbon Array 3 Carbon Stringers
- Double Impact Plates
- Sintered Base
- 142: 11 & Under
- 148: 11 & Under
- 151: 11 & Under
- 154: 12 & Under
- 158: 12 & Under
- Topless Topsheet Construction
- Cleave Edge™
- Roll In Slimewalls®: Fiberglass Casing
- 3 Year Warranty
Directional Rocker - Featuring rocker in the nose and a camber zone extending under the feet and through the tail.
Bi-Radial Sidecut - Combines a tight radius at the tip to provide quick, effortless turn initiation, with a wide radius at the tail to support a smooth and stable turn exit, this sidecut design maximizes grip while minimizing any loss of speed.
Performance™ Core - High strength Aspen is combined with Bamboo and lightweight Paulownia wood to decrease weight while increasing strength.
Thin Construction Tapered Tips - ALL Ride boards feature tapered tips and tails to reduce swing weight and enhance tip flex.
Hybrid Triax/Biax Fiberglass - A layer of triaxial fiberglass on top of the board with biaxial on the base balances torsion and stiffness for better response at speed. Ride takes stitched glass to new levels and tailors it to each board's needs. Their unique glass designs are flatter and more consistent, which increases strength and prevents gaps or stretching that can be found in woven glass.
Carbon Array 3 Carbon Stringers - 3 widespread carbon stringers are placed at the binding zone to gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control.
Double Impact Plates - Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, single and double.
Sintered Base - This high end sintered 4000 Ptex base material is more durable, harder and faster than extruded.
Topless Topsheet Construction - By transferring graphics directly to the fiberglass, Topless Construction removes the need to have any topsheet material. This process improves overall durability and reduces weight.
Cleave Edge™ - Nearly 50% more steel, delivers unmatched resistance to edge cracking and can be de-tuned to larger radii for extra smooth delivery.
Roll In Slimewalls®: Fiberglass Casing - Unique 3D fiberglass structure built around Ride's urethane Slimewalls® sidewalls. Designed to increase overall board strength, prevent topsheet chipping and reduce weight.
3 Year Warranty - Covered under manufacturer warranty for 3 years from the time of purchase. Warranty includes structural defects only and DOES NOT cover impact damage, abuse, misuse or normal wear and tear expected from aggressive riding.
Sorry folks, but bashing your board on a rock or rail does not qualify as a "manufacturer's defect" and will not be honored.
|Suggested Boot Size (US):||10 & under|
|Waist Width (cm):||25.0|
|Weight Range (lbs):||60 - 130|
|Stance Set Back (in):||0|
|Sidecut Radius (m):||4.6 / 5.6|
|Effective Edge (cm):||104.4|
|Tip Width (cm):||30.1|
|Tail Width (cm):||29.1|