The Atlas risers are made from recyclable HDPE and are compatible with Atlas 48° and 40° baseplates. Add these risers to your setup if you want to reduce road vibrations or need more wheel clearance.
- Set of 2 Risers
Hardware Compatibility Explained - Longer bolts are needed to accommodate the addition of risers. Deck thickness is another factor in this. Reference the chart below to find out what length hardware your setup will require. These are the suggested standard, you can go longer, just don't go shorter.
|Hardware Length for Standard 7-Ply Decks (in):||1 1/4 - 1 1/2|
|Hardware Length for Thicker 8/9-Ply Decks (in):||1 1/2 - 2|