C2X Power Banana Rocker/Camber Profile - A new formula of C2 with a short, but aggressive Banana rocker combined with cambers that sit underfoot. Extra solid tip and tail pressure for power, pop, precision and end-to-end stability combined with a medium amount of pressure between your feet for carving and edge hold on ice and float in pow.
Magne-Traction Serrated Edges - Award-winning Magne-Traction features strategically placed bumps that create seven contact points along each side of your sidecut. This increases edge hold and allows for knife-like carves without the hook. Magne-Traction is a perfect complement to Banana Rocker and helps increase grip and control.
Firepower Construction (FP) - Travis Rice’s new lower spin weight tip and tail construction … combines extended core, thinner tip/tail profile reinforced with UHMW material for impact deflection, carbon stiffening, and end grain Balsa Tech from Lib's Cygnus X1. This is Lib's smoothest construction because of its TNT base, ultra high molecular weight (UHMW) sintered sidewalls, and lightweight core woods like the added balsa wood in the center of the board to shed a few ounces, increasing your air-time and reducing leg fatigue.
Usually found on their higher-end boards, this is Lib's smoothest construction that remains lighter and environmentally nicer than their OP or HP constructions.
Handbuilt in the USA - Every Lib Tech board is handmade by snowboarders with jobs in the USA.
Aspen Wood - Light, strong, lively, fast growing, heat treated for maximum pop and long life.
Columbian Gold Wood - A lightweight, renewable wood core with loads of pop! This core provides increased response for precise turns when carving.
Paulownia Wood - Ultra light, strong, long lively fibers.
Balsa - Excellent shock absorption and the lightest of all commercial woods, Balsa is used in key points of the core. Its strength to weight ratio is unparalleled.
Birch Internal Sidewalls - Rugged, lightweight, vertical end grain Birch internal sidewalls add pop and durability where you need it when things get hard.
Axis Inversion Fiberglass - Provides more pop and power for enhanced response and easier riding.
Bi-axial Fiberglass - This 2-way fiber orientation is engineered to increase snap and decrease chatter.
Basalt Fiber Reinforcement - Basalt is volcanic rock produced in a clean, pure process consisting of high heat without toxic additives. Not only is it safer for humans, it’s easier to recycle. Basalt fiber has strength properties much higher than fiberglass and better damping properties for a smooth ride.
TNT Base - TNT is a dual Fluoropolymer extruded base infused with Titanium and Teflon. A Lib Tech favorite for its durability, this is Lib Tech's fastest unwaxed base. TNT can be waxed less than a sintered base and will stay fast longer. Not as high maintenance as sintered, yet offers comparable performance.
Bio-Plastic Bean Topsheet - Lib Tech has made a commitment to using a new earth friendly, bio-plastic top skin made from beans that feature the highest strength-to-weight ratio of any top sheet in the industry.
UHMW Sintered Sidewalls - A Lib Tech innovation that is twice as sintered as most industry sidewalls. This ultra high molecular weight (UHMW) material increases durability, response and control for easier riding.
Mervin Made: EnvironMENTAL Construction - All Lib Tech snowboards are handcrafted by Mervin Manufacturing in the USA near Canada!
Mervin has been environmentally aware from the beginning - 25+ years!
No cancer-causing toxic automotive lacquer clearcoats.
Soy-based elastomer sidewalls instead of toxic ABS.
Made using renewable forest products for all snowboard cores. Fast growing trees have long fibers and natural pop. Wood is nature's fiberglass!
Made with only low VOC (Volatile Organic Compound) epoxy resin systems. Mervin's resin doesn't stink or make you dizzy.
Mervin uses water-cleansed grinding systems to minimize airborne particulate levels.
The Mervin Factory has 2700% air replacement ventilation systems.
All wood sawdust is recycled as soil additive, plus scrap wood is donated to a local Mood Wood company that packages it as kindling and resells it.
All scrap plastics (base cutouts, etc) are recycled and then reground to make new materials.
Water-based solvents used for cleansing (instead of petrochemical-based solvents).
Canola-based biodiesel heats the Mervin factory and is a renewable resource.
1 Year Warranty - Covered under manufacturer warranty for 1 year from the time of purchase. Warranty includes structural defects only and DOES NOT cover impact damage, abuse, misuse or normal wear and tear expected from aggressive riding.
Sorry folks, but bashing your board on a rock or rail does not qualify as a "manufacturer's defect" and will not be honored.
|Suggested Boot Size (US):||11.5 & under||13 & under|
|Waist Width (cm):||25.8||26.4|
|Stance Set Back (in):||0.75||0.75|