Made in the USA - Made in San Francisco, California
Non-Compatible Risers
Risers from the following brands are not compatible with the baseplates of these trucks.
Dooks, Girl, Loaded, Paris
Sizing Reference
Note - Every skate truck brand represents their sizing a little differently, so it's easy to get confused. Take a look at this graphic and then reference the size chart.
These trucks were excellent and worked very nice on my board!
2people have found this review helpful
Was an indy rider back when
by Anthony
Posted on 4/12/2022
Venture Polished Skateboard Trucks
I've tried the new indys... they was adverage and I've tried tensor and they didn't have the heft. But these bad boys are the bees knees. They are tight like I used to ride and have that special something. I love the standards, nothing extra.
5people have found this review helpful
Give a Truck
by Kyle Childress
in Edwardsville, IL(Verified Buyer)
A 5.2 lo venture on a 14 inch wheelbase deck is perfect
11people have found this review helpful
Excellent feeling
by Dest101
Posted on 12/9/2021
Venture Polished Skateboard Trucks
This is a very solid truck. Manual point is easy to guage and no more air pop. I have tried the hollow lows w/ forged plates but these standards are a bit beefier and perfect weight. I recommend 51mm wheels and medium concave with these.
I like the feel of these trucks, I tend to like my trucks a little on the loose side. These are not getting as much wheel bite.
4people have found this review helpful
Asked by Divi on 10/27/2022
Do these come with bushings?
Answered
by Kat M
(Tactics Employee)
on 10/27/2022
Yes these are complete trucks
0person has found this answer helpful
Asked by Guillaume on 6/8/2016
hi, i would like to know if these are sold in pair or seperatly, thank you
Answered
by Elijah W
(Tactics Employee)
on 6/9/2016
Trucks on our website are always sold in pairs!
20people have found this answer helpful
Asked by Steve-O on 7/31/2013
Do these trucks grind on anything without getting stuck in one place?
Answered
on 8/14/2013
these will grind just like any other truck will. if the surface is not grindable, then of course, these will not grind.
18people have found this answer helpful
Asked by Farmer on 4/17/2013
Would the 8.o axle truck fit a 7.875 deck?
Answered
by Tim S
(Tactics Employee)
on 4/17/2013
Yes, that will fit fine.
9people have found this answer helpful
Asked by Skwad on 3/17/2013
I have an 8.0 size board and need new trucks because the ones I have now are ment for a smaller board. I would like to know if the king bolt would get in the way with these Ventures size 5.2?
Answered
by Daniel B
(Tactics Employee)
on 4/9/2013
the king pin on these trucks dont rely get in the way of riding.